26Sep

The Importance of Temperature in Die Casting

Importance of temperature in die casting

How hot does the metal get in die casting? It all depends on the metal you use and how carefully you adhere to die casting standards with respect to temperature. Does die casting mold temperature matter? It absolutely does. Die casting temperature control is a real issue if you wish to avoid die casting defects and other problems.

It’s important to understand the difference between metals in die casting when it comes to temperature and the consequences of poor temperature control when die casting.

General Effects of Temperature in Die Casting

In general, as temperatures increase, tensile and yield strengths decrease in die casted alloys. If you need parts with high tensile strength, this fact will be important to keep in mind. In addition, ductility increases as temperature increases, but changes depend on the type of alloy being die casted. For instance, aluminum is less ductile than zinc, but temperature must be higher for aluminum in the process.

Thermal Factors of Die Casting

The thermal factors of die casting are the temperature of the alloy used for casting, the temperature of the die itself and the temperature of the die casting machine. All of these factors must be kept in an optimum temperature range for the highest-quality parts. If the temperature of the molten metal is too hot for the mold, it could damage the mold by causing premature heat checking on the mold steel. If the mold temperature is too cold, it could drop the temperature of the metal too quickly as it flows into the mold and cause defects — especially greater porosity or misruns on the casting surface.

Temperature Considerations for Die Casting

To avoid putting a strain on the mold, you will want the alloy to be about 50 to 70 degrees F higher than the initial crystallization temperature. The mold itself needs to be maintained at about a third of the alloy temperature. The correct temperature for the casting chamber is a complex calculation that will be determined by the casting engineer.

Effects of Temperature on Various Die Casting Metals

So how does temperature affect the different metals used for die casting? Here are a few useful examples:

Aluminum

Aluminum is one of the most popular choices for metal die casting. It is lightweight, durable and has good corrosion resistance. The most popular aluminum alloys for die casting are 360, 380 and 413.

For Aluminum 380, for example, you’ll see a tensile strength of 48 at 75 degrees and a yield strength of 24. Get up to 212 degrees, and it’s 45 KSI (Kips Per Square Inch) tensile strength while the yield strength stays constant at 24. For Aluminum 390, yield strengths range from 41 KSI down to 18 KSI for 500 degrees.

Zinc

Zinc is another highly popular die casting alloy. Some common and most popular zinc alloys include Zamak 3, 5 and 7.

For these alloys, a temperature of 75 degrees produces an average 40 KSI, while a temperature of 275 degrees produces an average KSI as low as 10. Other zinc alloys show similar yield strength decline with increasing temperature.

Premier Die Casting’s Temperature Control Die Casting Standards

At Premier Die Casting, we take the issue of temperature control when it comes to die casting very seriously. We primarily use aluminum die casting and are highly experienced with keeping our materials and casting equipment at the optimal temperature for this type of casting. We also have state-of-the-art equipment, such as Mokon hot oil units to maintain the die temperature while die casting.

In addition, we have thermal controls on our die casting machines to maintain the proper oil temperature, and our holding furnaces maintain the proper metal temperature at the die casting machine. Our die cast machine cells are designed to help us maintain extremely accurate temperature control over the entire die casting environment, along with a team of metalworking engineers well-versed in critical temperature ranges and temperature control.

When you order metal parts from Premier Die Casting, you can be sure that you are going to get high-quality parts that look just as you expect them to, every time, with minimal defects. It’s our commitment to that kind of quality that has kept us the popular choice for die cast metal parts across a wide variety of industries for over 70 years. To learn more about our process and what we can do for your industry, call us at 800-394-3006 or contact us online today.

 

Leave a Reply

Your email address will not be published. Required fields are marked *